Front Page Corporate Profile Technical Articles E-Mail Distributors

Trade Conditions.
LClock XO3
XO3 Guides

Search L C Audio:
L C Audio Technology
H.C. Andersensvej 56
8230 Aabyhoej
Denmark

Contact
info06@lcaudio.dk
or Gert Frederiksen
+45 6062 9017

Technical support
support@lcaudio.dk

Webmaster
web07@lcaudio.dk



Show prices incl. VAT


Are you inside EU?



    Arcam Alpha 6



      Click!
      This is what your CD player looks like inside. Remove X1, a capacitor C11 and a transistor Q1 from the main board.




      Click!
      Connect the RED wire to the shown wire of C3 and the other end to +12V of LClock XO3 (the screw terminal furthest away from the orange relay). Shorten the COAX cable to 30 cm (12 inches) and remove insulation. Connect the ground screen of the COAX cable to pin 7 of 74HCU04, and the inner conductor to pin 3.




      Click!
      Set the solder bubble for 5V operation.




      Click!
      Fasten the LClock XO3 a suitable place, and use cable strips to secure the wires. Remember to plug the COAX cable to output of LClock XO3 (closest to the xtal marked: '22.5792').




      Click!
      Your player is now ready for operation! When you connect power, the blue LED on LClock XO3 will light up after about 10 seconds to indicate that power is OK. After one or two days you will experience the highest level of sound quality improvements.

Page Build Completed in: 0.016 seconds. .